FAQ
all
Install artificial grass
How to maintain artificial grass?
Artificial grass knowledge
Service and transportaion

all

How many accessories do we need to install artificial grass

Artificial grass Silica Sand and Rubber granules needed suggestion Pile Height Gauge rate Sand Size Sand Rubber granules Height of infill(mm) Dosage kg/m² 10 3/16 60-80 5 / 5 193/840-6013/1325133183216522403/420-40206263/840-60185503/420-40257303/840-6023655/603/420-403083555 with root3/840-60201135 64 with root 3/8 40-60 30 11 40

Reason of chromatic aberration in artificial turf production

There are many links that affect the quality of artificial turf, and many problems are caused. Among them, chromatic aberration is a common quality problem of artificial turf, and there are many ways to express chromatic aberration. The main reason for the color difference is that the raw materials of grass silk are not up to standard, the production line equipment technology is not up to standard, or the technology is not up to standard in the production process. First, the color difference is not completely caused by the overfeed. When replacing the new material, the remaining material in the screw could not be cleaned up, and the two phases were mixed, so that the ingredient composition of this part deviated from the set configuration, and the color of the straw drawn by the mixed part and the new material would be different. Second, the straight silk has multiple color differences. It means that there is a color difference between several strands of straight silk. Generally, it may be caused by problems in the setting of the spinneret opening, tension, and traction roller during the drawing of the straw. Third, the sharpness of the tip of the grass wire produces visual chromatic aberration. Grass bending is generally caused by inconsistent shrinkage of straight grass. The shrinkage of grass can be achieved by adjusting the drawing oven temperature, the setting oven temperature, and the annealing ratio.Fourth, the unevenness of the curved wire produces chromatic aberration. Uneven curvature of the silk will cause uneven and uneven surface of the artificial turf, which will cause visual chromatic aberration. The curvature of the curly grass must be uniform, which requires that the drawing process and formula are reasonable, and the temperature and air pressure of the curly machine are stable. Fifth, color difference caused by improper twist direction and twist. One twist of the twisted grass yarn is one twist. The number of twists per unit length is called twist, and the twist direction refers to the inclined direction of the grass fiber after twisting. The twist direction of artificial turf has a great influence on the appearance of artificial turf. Sixth, the rug is folds, and the rug folds produce chromatic aberration. Wrinkles are generally caused by the failure of the humidity to reach the standard when the base cloth is glued and dried. The folds of the blanket also cause the folds of the carpet surface. In addition, the improper winding of the grass may cause the carpet surface folds. Seventh, artificial turf products produced from different batches of raw materials may produce color differences when paved on the same site. The raw materials of different batches are often not completely the same, and generally have different degrees of difference, which will cause differences in the color of grass.

how much does artificial grass cost

The price of artificial turf mainly depends on the purpose and quality of the turf. Artificial turf is divided into sports type and leisure landscape type. The price of sports turf is generally between USD 4.00-8.00 / m2, and it will be more expensive if it is imported, and it is available between USD 10.00-20.00 / M2, including football field lawn, basketball court, tennis court lawn, golf lawn, gate court Lawn and more.Leisure lawns have a wide range of applications, such as kindergarden lawns, landscaping, home decoration,etc. The prices range from USD 1.00-10.00/M2.

Why use artificial lawn?

Artificial Grass/Lawns is a great ever lasting, never fading look for indoors and outdoors. Not only saving you money and time, but with our easy installation, you help the environment by saving massive amounts of water, not to mention all year round green lawns.

What is the best thickness for artificial grass?

It depends on the purpose and different people have different feelings, we can send samples to you, then you can touch it and feel it which one you prefer.

how to get rid of weeds from artificial grass

If your garden wasn’t excavated thoroughly enough or your sub-base is contaminated, you may find that weeds can grow through drainage holes. You can invest in a quality weed barrier to try and prevent them coming through.How to prevent weedsUse weed killer twice a yearRake grass regularlyIf you see a weed, pick it!Brush the lawn consistently to keep the fibres upright

How to remove stubborn stains from artificial grass

Act quickly — and remove as much of the spillage as possible before it begins to harden.Soak up any liquids with a clean cloth, kitchen towel or (if you have some to hand) cat litter — all of these will absorb any liquid.If there is still a mark, mix a small amount of washing up liquid and lukewarm water together. Apply with a synthetic bristled brush or a clean cloth or sponge.Work the solution in between and around the stained fibres. Rinse the area thoroughly with water from a garden hose or watering can.If the spillage has hardened, you may need to carefully remove it using either a plastic spatula or plastic knife. You could also try using a toothbrush to gently brush the stain away.

How to clean artificial grass

Follow these few simple stepsRegularly remove leaves and debris using a leaf blower, stiff brush or plastic rake.Trim hedges and trees often to limit the amount of leaves falling onto the lawn.Apply weed killer twice a year to the whole area to prevent weeds growing and to kill any stray ones.Use an artificial turf spray to clean away any urine from your pets. Sprinkle the area with baking soda before adding a diluted solution of water and vinegar to get rid of any odours.

How about the MOQ?

In general, the minimum order quantity for artificial grass is 1000 sqm,If it is less than 1000 sqm, you can contact our sales staff first.

Can we get a sample for reference?

Free artificial grass sample is available for you, just send us your delivery contact detail, contact person name, telephone number and express account number, then we can send out the free sample to you asap.

Will artificial grass fade?

No, all the products we install, are UV resistant and have undergone extensive testing to ensure that the color does not fade over time, which is all covered by 8-year warranty.

What's the material of our artificial grass? Are they safe?

UDINE artificial grass is made of PE, PP. 100% fresh material, environment-friendly and nonhazardous materials.  It is proved that there is no detectable trace of lead according to California's Prop 65, which is the strictest standard for lead content in the world.  Besides lead, other hazardous elements and heavy metal, such as Cd, Hg and Cr can also cause health problems.  UDINE landscape is free of all these hazardous substances.

What is the synthetic turf advantages?

1. Saving Water2. Easy Installation3. No Mowing, No Watering, No Fertilizing4. Up to 10 years service life5. All-year-round Green.

How to install artificial grass

Prepare Natural Ground for Artificial Turf ( If on cement floor, please start from step 2)1. Remove any existing grass with a flat shovel or turf cutter. 2. Compact the ground with a vibrating plate compactor. 3. Lay a non-woven cloth over the ground. Lay the Artificial Grass4. Cut the roll of artificial turf into lengths that fit the shape of your yard. 5. Lay the turf over the area in its permanent place. Make sure adjoining seams fit together without any visible gaps, but do not overlap them. 6. Cut the edges of the artificial turf to fit the edges of the lawn. Use a utility knife to cut the grass from its underside adhere the Joints. 7. Peel back the joints between the artificial grass strips along their length. Reveal enough of the underlying ground to fit the joint tape with an inch or two to spare on each side. 8. Lay the joint tape in the gap you have created so that, when laid, the seam between the two adjacent strips of artificial turf will run down its middle. 9. Paint the joint tape with the glue. 10. Lay the edges of the adjoining artificial grass pieces over the joint tape and adhesive so that they are in their original and permanent position. Weigh the joint down with sandbags. 11. Repeat for each of the joints in the turf. Options for Adhering the Edges of the Artificial Grass12. Nail down the edges of artificial turf on natural ground. 13. Apply the joint tape around the edges of artificial turf laid over concrete. (See step 10) Spread the Infill if required. 14. Spread the recommended amount of infill evenly over the artificial grass. 15. Rake the infill over the artificial turf to work it underneath the surface. 16. Allow it to settle overnight. 17. Spread and rake in more infill if necessary, until the space between the sub layer and the bottom of the artificial grass is filled.